Поддержка продуктов

Connect your mobile device with the remote controller, then connect with DJI Mini 2 via the DJI Fly app. Follow the app instructions to activate DJI Mini 2.

DJI Mini 2 comes with a user manual and comprehensive tutorials, which you can get from the Flight Academy in the DJI Fly app.You can follow DJI Support on Facebook and Twitter to get more tips on using DJI Mini 2.

No.

Yes. Always be sure to observe the surrounding environment carefully and set a proper altitude to avoid obstacles when using the Return to Home function.

No.

Yes. You can apply for permission to operate in restricted flight areas using the DJI Fly app. Apply by tapping “Unlock GEO Zone” in the DJI Fly app, or fill in the required information at https://www.dji.com/cn/flysafe/custom-unlock.

Motors, image transmission, camera performance, intelligent features, and user experience have all improved significantly. The image transmission system is particularly impressive as it has been upgraded to OcuSync 2.0 from enhanced Wi-Fi. An optimized operation process also makes DJI Mini 2 more intuitive.

The design has not changed drastically. The main differences are DJI Mini 2 has orange propeller tips, an additional front light, "4K" printed on the lens, a clickable aircraft status indicator, and smoother connection between the rear arm and the aircraft frame.

No.

No. Mavic Mini will not function with the battery of DJI Mini 2. Although the international version of DJI Mini 2 can use Mavic Mini’s battery, the power will decrease and the total weight will exceed 250 g, requiring registration in some countries and regions. Please check local rules and regulations before use.

Yes. Update DJI Mini 2 in DJI Fly app to the firmware version 1.1.0.0 or above; Update DJI Mavic Air 2 to the firmware version 1.0.4.60 or above. After firmware update, the remote controller can connect both aircrafts.

Currently, light gray is the only color option for DJI Mini 2. However, the DIY Creative Kit is available, which can be used to personalize and decorate DJI Mini 2. The DIY Creative Kit can be purchased separately at the DJI Online Store.

The standard weight of the aircraft (including battery, propellers, and a microSD card) is 242 grams. Actual product weight may vary. Registration is not required in some countries and regions. Check local rules and regulations before use.

To ensure transportation safety, DJI Mini 2 flight batteries are set to Sleep mode before shipping. Simply connect the aircraft with the battery charger to activate the battery and begin using. After activating the battery, press the power button once and then press and hold to turn on the aircraft.

No. A microSD card is required in order to store images and footage. Recommended microSD cards are:
Capacity Manufacturer/Model
16GB: SanDisk Extreme
32GB: Samsung Pro Endurance, Samsung Evo Plus, SanDisk Industrial, SanDisk Extreme V30 A1, SanDisk Extreme V30 A2, SanDisk Extreme Pro V30 A1, SanDisk Extreme Pro V30 A2, Lexar 633x, Lexar 667x 64GB: Samsung Pro Endurance, Samsung Evo Plus, SanDisk Extreme V30 A1, SanDisk Extreme V30 A2, Lexar 633x, Lexar 667x, Lexar 1000x, Lexar High Endurance, Toshiba EXCERIA M303 V30 A1, Netac Pro V30 A1
128GB: Samsung Pro Plus, Samsung Evo Plus, SanDisk Extreme V30 A1, SanDisk Extreme V30 A2, SanDisk Extreme Plus V30 A1, SanDisk Extreme Plus V30 A2, Lexar 633x, Lexar 667x, Lexar 1000x, Lexar High Endurance, Toshiba EXCERIA M303 V30 A1, Netac Pro V30 A1
256GB: SanDisk Extreme V30 A1, SanDisk Extreme V30 A2

Yes. However, when a microSD card is not installed, the photos or videos you take will be of a lower resolution (720p). It is recommended to install a microSD card before shooting.

No.

The international version of DJI Mini 2 differs from the Japanese version in weight, operating time, battery, and propellers.

No. DJI Mini 2 supports 2.4 GHz and 5.8 GHz simultaneously. In areas that support both frequency bands, DJI Mini 2 switches to the optimal frequency band and channel according to the signal conditions.

Its diagonal distance is 213 mm.

They can be folded 3,000 times.

The Mavic Mini antennas are located on the front aircraft arm landing gears.

When storing the DJI Mini 2, it is unnecessary for you to remove the propellers, and note that you should not press down on the propellers. If the propellers become misshapen, the flight performance will be affected. We recommend that you use the propeller holder to protect the propellers.

There is only one compass and one IMU in the DJI Mini 2.

The DJI Mini 2 aircraft (with factory U0 firmware) is equipped with GPS and GLONASS positioning systems. After its firmware is updated to U1 version, it uses the GPS, GLONASS, and Galileo navigation systems.

No, it does not have any heat sinks.

S Mode: 40°
N Mode: 25°; up to 40° when flying upwind.

The DJI Mini 2 is equipped with a fully stabilized 3-axis gimbal.

No, you cannot replace the gimbal yourself.

No, the DJI Mini 2 does not support PIV.

No, it does not support this.

DJI Mini 2 is equipped with a 1/2.3-inch CMOS sensor with up to 12 million effective pixels.

Photo Resolutions
4000×3000 (4:3)
4000×2250 (16:9)
Video
4K 24/25/30 fps
2.7K 24/25/30 fps
1080p 24/25/30/48/50/60 fps

DJI Mini 2 supports digital zoom, namely:
4K: 2x
2.7K: 3x
FHD: 4x
In the video recording view of the DJI Fly app, tap the zoom icon, touch the screen with two fingers, or use the dial while pressing the Fn button on the remote controller to zoom in.

Single Shot, Interval and AEB Triple Shot.

No.

Yes. It supports Sphere, 180°, and Wide-Angle.

Yes.

Yes. You can adjust shutter, ISO, and white balance in M mode.

Yes. The DJI Fly app QuickShots modes include Dronie, Helix, Rocket, Circle, and Boomerang.

Photo: The DJI Mini 2 only supports downloading JPG photos, and does not support downloading RAW photos. Photos of any resolution can be downloaded.
Video: The DJI Mini 2 supports downloading videos at up to 4K. Whether the downloaded video can be played depends on the hardware of the mobile device.

[Remote Controller Linking]
Method 1: Connect the DJI Mini 2 aircraft to the mobile device, enter the flight interface in DJI Fly, and tap "Pair to Aircraft (Link)" at the bottom of the interface to enter the linking state;
Method 2: Press and hold the "Customizable Button" on the upper left corner, the "Photo/Video Toggle" on the upper right corner, and the "Shutter/Record Button" on the top panel of remote controller for two seconds simultaneously. When the remote controller is beeping, and the battery level LEDs on the remote controller are blinking sequentially, you can start linking.
[Aircraft Linking]
When the DJI Mini 2 aircraft is powered on, press and hold the aircraft power button for 4 seconds. When the aircraft is beeping, and the battery level LEDs are blinking sequentially, the aircraft is linking.

Type-C

For iOS users, you can choose whether to charge the phone using the DJI Mini 2 remote controller in DJI Fly.
For Android users, the DJI Mini 2 charges the mobile device once it is connected by default, which cannot be disabled in DJI Fly.

We suggest that you operate the DJI Mini 2 in an environment with a temperature from -10°C to 40°C.

The battery capacity of the DJI Mini 2 remote controller is 5200 mAh.
It takes 3.5 hours to fully charge the remote controller.
When the remote controller does not act as a charger, its battery life is 6 hours.
When it acts as a charger, its battery life is 4 hours.

86 mm.

The maximum wind speed resistance is scale 5 (8.5 to 10.5 m/s).

The max horizontal flight speed (no wind) is:
S Mode: 16 m/s.
N Mode: 10 m/s.
C Mode: 6 m/s.

The propeller model is DJI 4726 FM, and the propeller diameter is 4.7 inches.

a. In the beginner mode, the flight altitude is limited to 30 meters, and the flight distance is limited to 30 meters.
b. The flight height and distance are set in the flight settings in DJI Fly.
c. When taking off in an environment with poor GPS signals (where the number of satellites searched does not reach the minimum requirement for the aircraft to hover), the flight altitude will be restricted.
d. If the pilot does not register the aircraft in China with their real name, the flight altitude will be limited to 30 meters, and the flight distance will be limited to 50 meters.
e. When the aircraft is flying in a restricted flight zone, there will be flight restrictions.
For more information, please contact DJI Support.

31 minutes (measured while flying at 4.7 m/s in windless conditions).

The maximum flight altitude is 500 m, which may vary in different countries and regions due to local laws. Before flying, please check local laws and regulations.

No. Please do not bend the propellers as it may affect the flight performance. We recommend using the 360° Propeller Guard for protection when storing.

Before each flight, it is necessary to check the propellers for cracks, wear, warp, corrosion, and loose screws. If any of these conditions are present, the propellers should be replaced. Follow the instructions in the user manual to replace the propellers.
Use the included screwdriver to change the propellers. Please follow the instructions provided. Remove the two blades and screws on the same arm, and replace with the propellers in the same package with new screws. Attach the propellers with marks to the arms with marks, and the unmarked propellers to unmarked arms. Ensure that the propellers and arms are installed securely before each flight.

The maximum service ceiling is 4000 m.

LiPo 2S battery.

Both the charging temperature and operating temperature of the DJI Mini 2 battery is 5℃ to 40℃.

You can connect the aircraft to a charger with Type-C cable, or use the Two-Way Charging Hub.

DJI Mini 2 does not have special requirements for the charger. You can use an ordinary USB charger.
DJI Mini 2 supports QC and USB PD fast-charging protocols, and supports up to 29 W of input power.

The DJI Mini 2 Two-Way Charging Hub supports QC and USB PD fast-charging protocols, and can charge up to three batteries in sequence. You can also use it for battery storage or as a power bank to charge your mobile device or remote controller via the USB-A port.

Before storage, it is recommended to charge the battery to approximately 72%. It is recommended to charge and discharge the battery once every three months to improve battery performance. If the battery level is below 72%, it is recommended to charge it until it is 72% before storing. If the battery level is above 72%, the battery will discharge automatically after 5 days to 72%.